Installation Instructions:

Please Note: The TieMaster installs best on a wall space that does not contain any studs. Anchors and screws included in this box are meant to be used for drywall only.

Step 1: Choose a location in your room or closet that has ample light and space for you to operate the TieMaster.

Step 2: To determine the ideal height of your TieMaster, place one of your favorite ties on your index finger so that the tie is hanging evenly on both sides. Hold the tie up to the wall (don’t overreach), use a pencil to mark the bottom of the tie on the wall. This will be where the top of your template will be placed.

Step 3: To ensure your TieMaster is level, measure from the floor to the pencil mark, then move 6-inches over, make a second mark with your pencil at the same height.

Step 4: With your pencil, remove the holes located in each corner of this template. Line up the template to the two pencil marks and with a piece of scotch tape, place the template on the wall. Use your pencil to mark the remaining holes provided on this template.

Step 5: With your screwdriver, take the anchors and screws provided in this box to install your TieMaster. Oops! Hit a stud? Install the TieMaster without the anchors.

If you have any questions please feel free to reach out to us at [email protected].